Sankalp Alloys Overseas
Mumbai, Maharashtra
GST No. 27IQEPS9463K1ZU
TrustSEAL Verified
Call 08047552649 82% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 50 Piece |
| Material Grade | 800 |
| Tensile Strength | 635 MPa |
| Country of Origin | Made in India |
| Bolt Material | Inconel |
| Elongation | 40% |
| Melting Point | 1413 Degree C |
| Hole Depth | 8 mm |
| Diameter | 5 mm |
A Ni-Cr alloy known for its high temperature stability & corrosion resistance
· High temperature stability up to 2200°F (982°C)
· Good corrosion resistance at elevated temperatures
· High strength material with excellent toughness at elevated temperatures
· Inconel ASTM F2281 bolts
· Inconel grades: 600, 601, 625, 686, 718, 725, X750
· In-depth insight on Alloy 625 and Alloy 718
· Datasheets available on Inconel 625 and Inconel 718
Inconel bolts, like Inconel 600, 601,625,686,718 & 725 bolts, are a family of nickel-chromium-molybdenum alloys used for their high strength at elevated temperatures and good corrosion resistance. Because of its high thermal stability, Inconel can be used in service temperatures ranging from cryogenic to 2200°F (982°C). The high alloy content of Inconel bolts enable it to withstand a wide variety of severe corrosive environments. In mild environments, such as the atmosphere, sea water, neutral salts, and alkaline media, there is almost no attack to Inconel bolts. In more severe corrosive environments the combination of nickel and chromium provides resistance to oxidizing chemicals, whereas the high nickel and molybdenum contents supply resistance to nonoxidizing environments.
Because Inconel bolts offer a good balance of corrosion resistance, temperature stability, toughness and strength they are often a material of choice for chemical processing, aerospace, marine, electronics and oil & gas.
The most commonly used grades of Inconel nickel alloy bolts are Inconel 625 and Inconel 718. For more indepth information on these specific grades, visit our Inconel 625 or Inconel 718 bolt pages, or contact one of our engineering experts.
Resources: Inconel Torque Spec, Inconel 625 bolts, Inconel 718 bolts
Bolt Types Available: Hex Bolts, Shoulder Bolts, Wedge Anchor BoltsThanks & Regards
Parth Shah
Sankalp Alloys Overseas
Product Details:
| Minimum Order Quantity | 50 Piece |
| Diameter | 8 mm |
| Material Grade | 625 |
| Color | Silver |
| Bolt Type | Button Head |
| Country of Origin | Made in India |
| Bolts Material | Inconel |
| Density | 8.47 g/cm3 |
| Elongation | 40% |
| Yield Strength | 310 MPa |
A Ni-Cr alloy known for its high temperature stability & corrosion resistance
· High temperature stability up to 2200°F (982°C)
· Good corrosion resistance at elevated temperatures
· High strength material with excellent toughness at elevated temperatures
· Inconel ASTM F2281 bolts
· Inconel grades: 600, 601, 625, 686, 718, 725, X750
· In-depth insight on Alloy 625 and Alloy 718
· Datasheets available on Inconel 625 and Inconel 718
Inconel bolts, like Inconel 600, 601,625,686,718 & 725 bolts, are a family of nickel-chromium-molybdenum alloys used for their high strength at elevated temperatures and good corrosion resistance. Because of its high thermal stability, Inconel can be used in service temperatures ranging from cryogenic to 2200°F (982°C). The high alloy content of Inconel bolts enable it to withstand a wide variety of severe corrosive environments. In mild environments, such as the atmosphere, sea water, neutral salts, and alkaline media, there is almost no attack to Inconel bolts. In more severe corrosive environments the combination of nickel and chromium provides resistance to oxidizing chemicals, whereas the high nickel and molybdenum contents supply resistance to nonoxidizing environments.
Because Inconel bolts offer a good balance of corrosion resistance, temperature stability, toughness and strength they are often a material of choice for chemical processing, aerospace, marine, electronics and oil & gas.
The most commonly used grades of Inconel nickel alloy bolts are Inconel 625 and Inconel 718. For more indepth information on these specific grades, visit our Inconel 625 or Inconel 718 bolt pages, or contact one of our engineering experts.
Resources: Inconel Torque Spec, Inconel 625 bolts, Inconel 718 bolts
Bolt Types Available: Hex Bolts, Shoulder Bolts, Wedge Anchor Bolts
Thanks & Regards
Parth Shah
Sankalp Alloys Overseas
Product Details:
| Minimum Order Quantity | 50 Piece |
| Material Grade | 600 |
| Fastener Type | Full Threaded |
| Type | Button Head Bolts |
| Country of Origin | Made in India |
| Bolt Material | Inconel |
| Density | 8.47 g/cm3 |
| Melting Point | 1413 Degree C |
| Size | 60 mm |
| Diameter | 10 mm |
A Ni-Cr alloy known for its high temperature stability & corrosion resistance
· High temperature stability up to 2200°F (982°C)
· Good corrosion resistance at elevated temperatures
· High strength material with excellent toughness at elevated temperatures
· Inconel ASTM F2281 bolts
· Inconel grades: 600, 601, 625, 686, 718, 725, X750
· In-depth insight on Alloy 625 and Alloy 718
· Datasheets available on Inconel 625 and Inconel 718
Inconel bolts, like Inconel 600, 601,625,686,718 & 725 bolts, are a family of nickel-chromium-molybdenum alloys used for their high strength at elevated temperatures and good corrosion resistance. Because of its high thermal stability, Inconel can be used in service temperatures ranging from cryogenic to 2200°F (982°C). The high alloy content of Inconel bolts enable it to withstand a wide variety of severe corrosive environments. In mild environments, such as the atmosphere, sea water, neutral salts, and alkaline media, there is almost no attack to Inconel bolts. In more severe corrosive environments the combination of nickel and chromium provides resistance to oxidizing chemicals, whereas the high nickel and molybdenum contents supply resistance to nonoxidizing environments.
Because Inconel bolts offer a good balance of corrosion resistance, temperature stability, toughness and strength they are often a material of choice for chemical processing, aerospace, marine, electronics and oil & gas.
The most commonly used grades of Inconel nickel alloy bolts are Inconel 625 and Inconel 718. For more indepth information on these specific grades, visit our Inconel 625 or Inconel 718 bolt pages, or contact one of our engineering experts.
Resources: Inconel Torque Spec, Inconel 625 bolts, Inconel 718 bolts
Bolt Types Available: Hex Bolts, Shoulder Bolts, Wedge Anchor Bolts
Thanks & Regards
Parth Shah
Sankalp Alloys OverseasAdditional Information:
Product Details:
| Minimum Order Quantity | 50 Piece |
| Inner Diameter | 22 mm |
| Material | Inconel |
| Country of Origin | Made in India |
| Material Grade | 825 |
| Outer Diameter | 60 mm |
| Thickness | 4 mm |
INCONEL WASHERS
A Ni-Cr alloy known for its corrosion resistance and high temperature stability
Inconel washers, like Inconel 600, 601,625, 686, 718 & 725 washers, are a family of nickel-chromium-molybdenum alloys used for their high strength at elevated temperatures and good corrosion resistance. Because of its high thermal stability, Inconel can be used in service temperatures ranging from cryogenic to 2200°F (982°C). The high alloy content of Inconel washers enable it to withstand a wide variety of severe corrosive environments. In mild environments, such as the atmosphere, sea water, neutral salts, and alkaline media, there is almost no attack to Inconel washers. In more severe corrosive environments the combination of nickel and chromium provides resistance to oxidizing chemicals, whereas the high nickel and molybdenum contents supply resistance to nonoxidizing environments.
Because Inconel washers offer a good balance of corrosion resistance, temperature stability, toughness and strength they are often a material of choice for chemical processing, aerospace, marine, electronics and oil & gas.
The most common grades of Inconel nickel alloy washers are Inconel 625 and Inconel 718. Gain more insight on these two grades by accessing our Inconel 625 and Inconel 718 overviews or by contacting our engineering experts.
Resources: Inconel Torque Spec, Inconel 625, Inconel 718
Washer Types: Flat Washers & Lock Washers
Thanks & Regards,
Parth Shah
Sankalp Alloys Overseas
Product Details:
| Minimum Order Quantity | 50 Piece |
| Material Grade | 800 |
| Hole Diameter | 15 mm |
| Shape | Round |
| Country of Origin | Made in India |
| Washer Material | Inconel |
| Diameter | 60 mm |
| Thickness | 4 mm |
INCONEL WASHERS
A Ni-Cr alloy known for its corrosion resistance and high temperature stability
Inconel washers, like Inconel 600, 601,625, 686, 718 & 725 washers, are a family of nickel-chromium-molybdenum alloys used for their high strength at elevated temperatures and good corrosion resistance. Because of its high thermal stability, Inconel can be used in service temperatures ranging from cryogenic to 2200°F (982°C). The high alloy content of Inconel washers enable it to withstand a wide variety of severe corrosive environments. In mild environments, such as the atmosphere, sea water, neutral salts, and alkaline media, there is almost no attack to Inconel washers. In more severe corrosive environments the combination of nickel and chromium provides resistance to oxidizing chemicals, whereas the high nickel and molybdenum contents supply resistance to nonoxidizing environments.
Because Inconel washers offer a good balance of corrosion resistance, temperature stability, toughness and strength they are often a material of choice for chemical processing, aerospace, marine, electronics and oil & gas.
The most common grades of Inconel nickel alloy washers are Inconel 625 and Inconel 718. Gain more insight on these two grades by accessing our Inconel 625 and Inconel 718 overviews or by contacting our engineering experts.
Resources: Inconel Torque Spec, Inconel 625, Inconel 718
Washer Types: Flat Washers & Lock WashersThanks & Regards,
Parth Shah
Sankalp Alloys Overseas
Product Details:
| Minimum Order Quantity | 1000 Piece |
| Diameter | 3 mm |
| Outer Diameter | 50 mm |
| Thickness | 2.5 mm |
| Inner Diameter | 16 mm |
| Usage | manufacturing |
| Country of Origin | Made in India |
| Grade | 718 |
| Material | Inconel |
Additional Information:
Product Details:
| Minimum Order Quantity | 50 Piece |
| Size | M16 |
| Material Grade | Inconel 625 |
| Color | Silver |
| Standard | Threaded |
| Grade | Inconel 625 |
| Type | Bolt |
| Diameter | 16mm |
| Quantity Per Pack | 20 |
| Material | Inconel 625 |
| Thread Type | Full Thread |
| Length | 3 Inch |
| Country of Origin | Made in India |
| Tensile Strength | 655 Mpa |
| Bolt Material | Inconel |
Inconel Bolts
A Ni-Cr alloy known for its high temperature stability & corrosion resistance
· High temperature stability up to 2200°F (982°C)
· Good corrosion resistance at elevated temperatures
· High strength material with excellent toughness at elevated temperatures
· Inconel ASTM F2281 bolts
· Inconel grades: 600, 601, 625, 686, 718, 725, X750
· In-depth insight on Alloy 625 and Alloy 718
· Datasheets available on Inconel 625 and Inconel 718
Inconel bolts, like Inconel 600, 601,625,686,718 & 725 bolts, are a family of nickel-chromium-molybdenum alloys used for their high strength at elevated temperatures and good corrosion resistance. Because of its high thermal stability, Inconel can be used in service temperatures ranging from cryogenic to 2200°F (982°C). The high alloy content of Inconel bolts enable it to withstand a wide variety of severe corrosive environments. In mild environments, such as the atmosphere, sea water, neutral salts, and alkaline media, there is almost no attack to Inconel bolts. In more severe corrosive environments the combination of nickel and chromium provides resistance to oxidizing chemicals, whereas the high nickel and molybdenum contents supply resistance to nonoxidizing environments.
Because Inconel bolts offer a good balance of corrosion resistance, temperature stability, toughness and strength they are often a material of choice for chemical processing, aerospace, marine, electronics and oil & gas.
The most commonly used grades of Inconel nickel alloy bolts are Inconel 625 and Inconel 718. For more indepth information on these specific grades, visit our Inconel 625 or Inconel 718 bolt pages, or contact one of our engineering experts.
Resources: Inconel Torque Spec, Inconel 625 bolts, Inconel 718 bolts
Bolt Types Available: Hex Bolts, Shoulder Bolts, Wedge Anchor Bolts
Parth Shah
Sankalp Alloys Overseas
Product Details:
| Minimum Order Quantity | 1000 Piece |
| Size | M100 |
| Material Grade | 617 |
| Fastener Type | Hexagonal |
| Grade | Inconel 617 |
| Type | Button Head |
| Diameter | 20 mm |
| Color | Silver |
| Material | Inconel |
| Finishing | Polished |
Inconel Bolts
A Ni-Cr alloy known for its high temperature stability & corrosion resistance
· High temperature stability up to 2200°F (982°C)
· Good corrosion resistance at elevated temperatures
· High strength material with excellent toughness at elevated temperatures
· Inconel ASTM F2281 bolts
· Inconel grades: 600, 601, 625, 686, 718, 725, X750
· In-depth insight on Alloy 625 and Alloy 718
· Datasheets available on Inconel 625 and Inconel 718
Inconel bolts, like Inconel 600, 601,625,686,718 & 725 bolts, are a family of nickel-chromium-molybdenum alloys used for their high strength at elevated temperatures and good corrosion resistance. Because of its high thermal stability, Inconel can be used in service temperatures ranging from cryogenic to 2200°F (982°C). The high alloy content of Inconel bolts enable it to withstand a wide variety of severe corrosive environments. In mild environments, such as the atmosphere, sea water, neutral salts, and alkaline media, there is almost no attack to Inconel bolts. In more severe corrosive environments the combination of nickel and chromium provides resistance to oxidizing chemicals, whereas the high nickel and molybdenum contents supply resistance to nonoxidizing environments.
Because Inconel bolts offer a good balance of corrosion resistance, temperature stability, toughness and strength they are often a material of choice for chemical processing, aerospace, marine, electronics and oil & gas.
The most commonly used grades of Inconel nickel alloy bolts are Inconel 625 and Inconel 718. For more indepth information on these specific grades, visit our Inconel 625 or Inconel 718 bolt pages, or contact one of our engineering experts.
Resources: Inconel Torque Spec, Inconel 625 bolts, Inconel 718 bolts
Bolt Types Available: Hex Bolts, Shoulder Bolts, Wedge Anchor Bolts
Parth Shah
Sankalp Alloys Overseas
Additional Information:
Product Details:
| Minimum Order Quantity | 50 Piece |
| Diameter | 6 mm |
| Material Grade | 825 |
| Tensile Strength | 650 MPa |
| Country of Origin | Made in India |
| Bolt Material | Inconel |
| Melting Point | 1200 Degree C |
A Ni-Cr alloy known for its high temperature stability & corrosion resistance
· High temperature stability up to 2200°F (982°C)
· Good corrosion resistance at elevated temperatures
· High strength material with excellent toughness at elevated temperatures
· Inconel ASTM F2281 bolts
· Inconel grades: 600, 601, 625, 686, 718, 725, X750
· In-depth insight on Alloy 625 and Alloy 718
· Datasheets available on Inconel 625 and Inconel 718
Inconel bolts, like Inconel 600, 601,625,686,718 & 725 bolts, are a family of nickel-chromium-molybdenum alloys used for their high strength at elevated temperatures and good corrosion resistance. Because of its high thermal stability, Inconel can be used in service temperatures ranging from cryogenic to 2200°F (982°C). The high alloy content of Inconel bolts enable it to withstand a wide variety of severe corrosive environments. In mild environments, such as the atmosphere, sea water, neutral salts, and alkaline media, there is almost no attack to Inconel bolts. In more severe corrosive environments the combination of nickel and chromium provides resistance to oxidizing chemicals, whereas the high nickel and molybdenum contents supply resistance to nonoxidizing environments.
Because Inconel bolts offer a good balance of corrosion resistance, temperature stability, toughness and strength they are often a material of choice for chemical processing, aerospace, marine, electronics and oil & gas.
The most commonly used grades of Inconel nickel alloy bolts are Inconel 625 and Inconel 718. For more indepth information on these specific grades, visit our Inconel 625 or Inconel 718 bolt pages, or contact one of our engineering experts.
Resources: Inconel Torque Spec, Inconel 625 bolts, Inconel 718 bolts
Bolt Types Available: Hex Bolts, Shoulder Bolts, Wedge Anchor BoltsThanks & Regards
Parth Shah
Sankalp Alloys Overseas
Product Details:
| Minimum Order Quantity | 1000 Piece |
| Nominal Nut Diameter | M20 (20 mm) |
| Material Grade | 600 |
| Weight | 10 gm |
| Country of Origin | Made in India |
| Nut Material | Inconel |
| Thickness | 8 mm |
INCONEL NUTS
A Ni-Cr alloy known for its corrosion resistance and high temperature stability
Inconel® nuts and lock nuts, like Inconel 600, 601,625, 686, 718 & 725 nuts, are a family of nickel-chromium-molybdenum alloys used for their high strength at elevated temperatures and good corrosion resistance. Because of its high thermal stability, Inconel can be used in service temperatures ranging from cryogenic to 2200°F (982°C). The high alloy content of Inconel nuts enable it to withstand a wide variety of severe corrosive environments. In mild environments, such as the atmosphere, sea water, neutral salts, and alkaline media, there is almost no attack to Inconel nuts. In more severe corrosive environments the combination of nickel and chromium provides resistance to oxidizing chemicals, whereas the high nickel and molybdenum contents supply resistance to nonoxidizing environments.
Because Inconel nuts offer a good balance of corrosion resistance, temperature stability, toughness and strength they are often a material of choice for chemical processing, aerospace, marine, electronics and oil & gas.
The most common grades of Inconel nickel alloy nuts are Inconel 625 and Inconel 718. Gain more insight on these two grades by accessing our Inconel 625 and Inconel 718 overviews or by contacting our engineering experts.
Resources: Inconel Torque Spec, Inconel 625, Inconel 718
Nut Styles: Hex Nuts, Lock Nuts
Thanks & Regards,
Parth Shah
Sankalp Alloys Overseas
Product Details:
| Minimum Order Quantity | 50 Piece |
| Nominal Nut Diameter | M22 (22 mm) |
| Material Grade | 800HT |
| Thickness | 10 mm |
| Weight | 5 gm |
| Country of Origin | Made in India |
| Nut Material | Inconel |
INCONEL NUTS
A Ni-Cr alloy known for its corrosion resistance and high temperature stability
Inconel® nuts and lock nuts, like Inconel 600, 601,625, 686, 718 & 725 nuts, are a family of nickel-chromium-molybdenum alloys used for their high strength at elevated temperatures and good corrosion resistance. Because of its high thermal stability, Inconel can be used in service temperatures ranging from cryogenic to 2200°F (982°C). The high alloy content of Inconel nuts enable it to withstand a wide variety of severe corrosive environments. In mild environments, such as the atmosphere, sea water, neutral salts, and alkaline media, there is almost no attack to Inconel nuts. In more severe corrosive environments the combination of nickel and chromium provides resistance to oxidizing chemicals, whereas the high nickel and molybdenum contents supply resistance to nonoxidizing environments.
Because Inconel nuts offer a good balance of corrosion resistance, temperature stability, toughness and strength they are often a material of choice for chemical processing, aerospace, marine, electronics and oil & gas.
The most common grades of Inconel nickel alloy nuts are Inconel 625 and Inconel 718. Gain more insight on these two grades by accessing our Inconel 625 and Inconel 718 overviews or by contacting our engineering experts.
Resources: Inconel Torque Spec, Inconel 625, Inconel 718
Nut Styles: Hex Nuts, Lock Nuts
Thanks & Regards,
Parth Shah
Sankalp Alloys Overseas