Sankalp Alloys Overseas
Grant Road, Mumbai, Maharashtra
GST No. 27IQEPS9463K1ZU
TrustSEAL Verified
Call 08047552649 92% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 50 Kg |
| Stud Diameter | M12 |
| Material | Carbon Steel |
| Nut Type | Hex Nut |
| Stud Length | 150 mm |
| Standard | ASTM A193 B7 |
| Thread Type | Full Thread |
| Coating | Hot Dip Galvanized |
| Nut Grade | 2H |
| Bolt Diameter | M3 (3 mm) |
| Finish | Hot Dip Galvanized (HDG) |
| Color | Silver |
| Packaging Type | Box |
ASTM A193 Grade B7 specification covers requirements for high tensile alloy steel bolting material for use in high temperature or high-pressure service and other special purpose applications. It is a standard specification defining typical chemical composition, mechanical properties, hardness requirement, preferential heat treatment, product marking, certification and other requirements, suitable for bolting used in pressure vessel service, valves, flanges and fittings. ASTM A193 defines both SI (Metric) and inch-pound units.
Grade B7 is a heat-treated chromium-molybdenum low-alloy steel with minimum tensile strength requirement of 125 ksi (860 Mpa), yield 105 ksi (720 Mpa), and maximum hardness of 35HRC. Boltport uses Alloy Steel AISI 4140 bar stock or forging stock to produce B7 headed and non-headed bolts. A193 Grade B7 is the most commonly used Bolt specification coupled with A194 Grade 2H Nuts for Bolting Carbon Steel pipeline. A193 B7 bolting is available in metric sizes from M6 to M180 and imperial sizes from 1/4 to 7 inches, in diameter.
Find information on ASTM A193 Grade B7 chemical composition, mechanical properties such as tensile strength; yield strength, hardness, marking requirements and reference product standards.
Additional Information:
Product Details:
| Minimum Order Quantity | 50 Piece |
| Thread Size | M6 |
| Fastener Type | Nut |
| Nut Type | Heavy Hex Nut |
| Grade | A193 B7 |
| Thread Type | BSF |
| Material | Carbon Steel |
| Finish | Blackodised |
| Standards | ISO |
| Size | M6 |
| Surface Treatment | Annealed |
| Elongation | 20% |
| Head Type | Hex Nut |
| Width Across Flats | 13 mm |
| Surface Finishing | Annealed |
| Nut Height | 5 mm |
| Surface Hardness | 220 HV |
| Coating Thickness | 8 micron |
| Standard | ASTM |
We are engaged in offering Carbon Steel ASTM A193 B7 Nut to our clients. Our range of all products is widely appreciated by our clients.
Additional Information:
Product Details:
| Minimum Order Quantity | 15 Piece |
| Diameter | M10 |
| Length | 50 mm |
| Grade | A193 B7 |
| Thread Type | Full Thread |
| Bolt Type | Stud Bolt |
| Material | Carbon Steel |
| Finish | Hot Dip Galvanized |
| Usage/Application | manufacturing |
| Color | Silver |
| Size | M200 |
| Surface Treatment | Heat Treatment & Annealed |
| Head Type | Hexagonl |
| Standard | ASTM |
We are engaged in offering Carbon Steel ASTM A193 B7 Bolt to our clients. Our range of all products is widely appreciated by our clients.
Additional Information: